SAFETY RULES
• Be careful against danger of entrapment while attaching/detaching the plough to/from the tractor; do not stand between the plough and tractor.
• Do not move the tractor without being sure that plough is completely attached to the tractor, and it is completely detached from tractor while detaching.
• Do not carry people or loads on the plough.
• While transporting the plough on the road, turn tractor hydraulic to locking position.
• When the disc harrow is elevated, do not stand under it.
• Be careful against the pointed and sharp edges on the disc harrow.
• Front hydraulic selector must be in position control while attaching/detaching the disc harrow, in draw control during operation and in locking position during transportation.
• Be careful against danger of tipping over of the tractor while working on sloping lands.
• While turning, maximum area to which the disc harrow can reach should be considered.
• If the disc harrow is to be transported at long distances, it should be transported on the trailer.
• The plough should be loaded and unloaded with a hoist or crane when loaded on the trailer and unloaded from the trailer.
• Attachment/detachment of the plough should be carried out with a helper if possible, if not, apply handbrake while getting off the tractor.
• While transporting the plough on the highways, observe applicable traffic rules and be more careful.
• If any maintenance or repairs are to be made on the plough, the plough should be leveled and completely lowered to the ground, and the necessary safety precautions should be taken.
• Maintenance and repairs to be made on plough should be carried out by trained specialists who are familiar with safety precautions.
• The disc harrow and tractor categories should match each other.
• Warning labels on the plough should always be clean and visible. If the warning labels have become worn, lost or illegible for any reason, they should be obtained from our nearest dealer and affixed to their places.
POINTS TO CONSIDER WHILE SELECTING DISC HARROW
• The power of the tractor to be used must match the power requirement of the disc harrow.
• The soil structure where the disc harrow will be used should be considered.
GENERAL RULES TO BE OBSERVED
• Move slowly and carefully under poor land and road conditions.
• The disc harrow should not be maneuvered back while in the ground.
• Do not attach additional non-original equipment to the disc harrow.
• Never perform welding on the disc harrow, replace the damaged part with an original one.
• The disc harrow should be operated by turning left continuously during operation in the field.