• Take down the machine and make sure that it is placed steadily at the end of work. Support and secure it with wedges against the risks of rolling and rollover.
• It is recommended washing your machine with plenty of water (not high-pressure). Otherwise it causes humidity and corrosion.
• It is not recommended using high-pressure water while cleaning the machine; but if machine will be cleaned with high-pressure water; 0,7 m should be kept between the head of sprinkler and you!
• Check the elements, blades, cylinder flanges and cylinder junctions etc. which may contain plant residues and clean the same, if necessary. Enzymes which may be released during corrosion may damage the surface of machine.
• When the cleaning of machine is over, grease all lubrication points as shown and detailed in lubrication part.
• Clean the PTO shaft as recommended and grease all necessary points as described.
• Determine the worn parts on the machine and replace them with original spare parts if necessary.
• If paint is damaged, touch it up. Cover the shiny surfaces with corrosion protector.
• Machine should be stored on a rigid and flat ground in a dry, closed place.
• List the necessary spare parts and order them from the authorized service, dealer of ALPLER or directly manufacturing firm, so your needs may be met on time and your machine becomes ready for the following season.